co employment corner a compliance column for PEOs

Where co-employment liability really sits on wage and hour claims

Author: Gordon M. Berger, Founding Partner at Pierson Ferdinand

A PEO-perspective analysis, including the question every PEO executive eventually asks: “When a client misclassifies someone, how exposed are we?”

Is a PEO liable for its clients’ wage and hour violations?

A professional employer organization (PEO) is not a guarantor of its clients’ pay practices, but it is not a disinterested party either. Under the Fair Labor Standards Act (FLSA) and most state wage laws, liability follows control over the employees. The client (or worksite employer), which directs the work day to day, sets schedules, and decides who is an employee and who is a contractor, almost always sits at the center of a wage and hour claim. The PEO’s exposure grows with what it actually does, not with what its contract says it does. A PEO that only processes payroll on client-supplied data is usually a weak joint-employer target. A PEO that classifies workers, designs pay plans, administers timekeeping, or advises on exemption status can become a principal defendant.

Contract allocation matters a great deal, but it does not bind workers or regulators because they are not parties to the agreement. Courts generally refuse to let an employer escape FLSA liability through indemnity, so the client service agreement (CSA) is a tool for shifting cost between the PEO and the client, not for avoiding liability to the employee.

1. What laws govern PEO co-employment liability?

Who counts as an employer under the FLSA?

The FLSA defines “employer” to include “any person acting directly or indirectly in the interest of an employer in relation to an employee,” 29 U.S.C. § 203(d), and defines “employ” as “to suffer or permit to work,” 29 U.S.C. § 203(g). The Supreme Court has described the “suffer or permit” standard as broader than the common law. Rutherford Food Corp. v. McComb, 331 U.S. 722 (1947); Nationwide Mut. Ins. Co. v. Darden, 503 U.S. 318, 326 (1992). The statute contemplates that a worker can have more than one employer, each jointly and severally liable for minimum wage (29 U.S.C. § 206) and overtime (29 U.S.C. § 207) violations.

Remedies are significant: unpaid wages, an equal amount in liquidated damages, and mandatory attorney’s fees for prevailing plaintiffs (29 U.S.C. § 216(b)); a two-year limitations period extended to three years for willful violations (29 U.S.C. § 255(a)); and a good-faith defense to liquidated damages that the employer must prove (29 U.S.C. § 260). Collective actions under § 216(b) mean a single client’s misclassification can become a multi-plaintiff case quickly.

Is there a federal joint-employer rule?

There is currently no operative federal regulation defining FLSA joint employment. The Department of Labor’s 2020 rule (85 Fed. Reg. 2820, codified at 29 C.F.R. part 791) adopted a narrow four-factor test focused on whether the putative joint employer hires and fires, supervises and controls schedules or conditions, determines pay rate and method, and maintains employment records. The Southern District of New York vacated most of that rule in New York v. Scalia, 490 F. Supp. 3d 748 (S.D.N.Y. 2020), and DOL rescinded it effective in 2021 (86 Fed. Reg. 40939 (July 30, 2021)). DOL has signaled interest in new joint-employer rulemaking; PEOs should monitor the regulatory agenda, as the status of any proposal may have changed since this article was prepared.

Although the 2020 rule is no longer in effect, its observation that maintaining employment records alone does not establish joint-employer status remains persuasive in many courts and tracks the PEO payroll-administration model.

Which joint-employer tests do courts apply?

Without a regulation, the circuits apply their own tests, and PEOs operating nationally face different standards by jurisdiction:

  • Bonnette v. California Health & Welfare Agency, 704 F.2d 1465 (9th Cir. 1983): whether the alleged employer (1) had power to hire and fire, (2) supervised and controlled schedules or conditions, (3) determined rate and method of payment, and (4) maintained employment records. Many circuits use this or a variant.
  • Zheng v. Liberty Apparel Co., 355 F.3d 61 (2d Cir. 2003): adds functional factors addressing economic reality, such as whether workers performed a discrete line job integral to the putative employer’s process.
  • Salinas v. Commercial Interiors, Inc., 848 F.3d 125 (4th Cir. 2017): asks whether the two entities are “not completely disassociated” with respect to the worker’s employment, a plaintiff-friendly test that poses the greatest risk to PEOs in Maryland, Virginia, West Virginia, and the Carolinas.
  • In re Enterprise Rent-A-Car Wage & Hour Emp. Practices Litig., 683 F.3d 462 (3d Cir. 2012): a modified Bonnette test with a totality-of-circumstances overlay.

Across these tests, the same facts expose PEOs to liability: participating in hiring or termination decisions, setting or approving pay rates, configuring and administering timekeeping systems, and providing HR advice on classification or exemption status.

Is state law broader than the FLSA?

State law frequently imposes more expansive standards. In California, the Industrial Welfare Commission wage orders define “employ” to mean to exercise control over wages, hours, or working conditions, or to suffer or permit to work. Martinez v. Combs, 49 Cal. 4th 35 (2010). California also imposes shared liability on “client employers” for wage violations by labor contractors (Cal. Lab. Code § 2810.3), and the Labor Code permits individual liability for persons acting on behalf of an employer (Cal. Lab. Code § 558.1). For classification, California applies the ABC test codified by AB 5 (Cal. Lab. Code § 2775 et seq.), following Dynamex Operations West, Inc. v. Superior Court, 4 Cal. 5th 903 (2018). New York, New Jersey (which also uses an ABC test, N.J.S.A. 43:21-19(i)(6)), Massachusetts (M.G.L. c. 149, § 148B), Illinois, and Washington likewise warrant jurisdiction-specific review.

More than 40 states have PEO licensing or registration statutes. Many expressly allocate responsibilities between the PEO and the client, often providing that the client retains control of the worksite and the PEO is responsible for paying wages it has agreed to pay. Florida’s statute (Fla. Stat. ch. 468, part XI, including § 468.525) and Texas’s statute (Tex. Lab. Code ch. 91) are representative. These statutes can be helpful in defense, but they generally do not displace the FLSA or a state’s wage-payment act, and PEOs should confirm the precise language and obligations in each licensing state.

Does CPEO certification shift payroll tax liability?

Payroll tax exposure is a separate silo. Under 26 U.S.C. § 3511, a certified PEO (CPEO) is treated as the employer for federal employment tax purposes for covered wages paid to worksite employees, and the client is generally not liable for those taxes. That protection does not extend to non-CPEO PEOs or FLSA wage obligations, and it applies only to individuals properly treated as worksite employees. Misclassified contractors paid outside the PEO’s payroll are typically not covered, and the client bears the reclassification tax exposure (including rates under 26 U.S.C. § 3509 where applicable). Non-certified PEOs should assume the client remains the employer of record for IRS purposes.

2. How exposed is a PEO when a client misclassifies someone?

The honest answer is that it depends on which of three scenarios the PEO is in.

Scenario Typical PEO exposure Why
Client pays the worker as a 1099 contractor outside the PEO; PEO never touches the worker Low PEO has no hiring, pay, supervision, or records role for that individual. Joint-employer factors are largely absent.
Worker is on PEO payroll, but client misclassifies them as exempt (e.g., salaried “manager” with no overtime) Moderate PEO pays wages and keeps records, so it is a named defendant. Liability turns on whether the PEO influenced the classification or pay structure and on the forum’s test.
PEO advised on, approved, or set the classification or pay plan High PEO is exercising control over pay rate and method, a core joint-employer factor. Advice can also undercut the good-faith defense to liquidated damages.

Exempt-status misclassification

Misclassifying employees as exempt under the executive, administrative, or professional exemptions (29 C.F.R. part 541) is the most common PEO-adjacent claim. The salary-level component reverted to the 2019 threshold of $684 per week after the 2024 DOL rule was vacated in Texas v. U.S. Department of Labor, No. 4:24-cv-499 (E.D. Tex. Nov. 15, 2024); several states (including California, New York, Washington, and Colorado) set higher thresholds. Because exemption status turns on a fact-specific duties inquiry, a PEO that simply applies the client’s designation is in a much better position than one that recommends it.

Independent contractor misclassification

The federal test is the economic-reality test applied by the courts. DOL’s 2024 independent contractor rule (89 Fed. Reg. 1638, 29 C.F.R. part 795) remains on the books, but in May 2025 DOL announced that it would not apply that rule in enforcement and would instead rely on prior guidance pending reconsideration (Field Assistance Bulletin No. 2025-1). Private litigants and courts continue to apply circuit economic-reality factors. Where the contractor never enters the PEO’s HRIS, the PEO typically lacks the control needed for joint employment. Exposure increases sharply, however, if the PEO onboarded or paid the worker, or if PEO staff advised the client that contractor treatment was appropriate.

Off-the-clock and regular rate errors

Rounding, unpaid pre- and post-shift work, and failure to include bonuses or commissions in the regular rate (29 U.S.C. § 207(e); 29 C.F.R. part 778) often stem from timekeeping and payroll configuration. If the PEO built the timekeeping rules or calculates overtime, then these claims are more directly attributable to the PEO than classification claims, and the PEO should treat payroll-engine accuracy as its own compliance responsibility.

3. Can a client service agreement shift wage and hour liability?

Federal courts have consistently held that there is no right to contribution or indemnity for an employer under the FLSA, reasoning that allowing it would undermine the statute’s deterrent purpose. Herman v. RSR Security Services Ltd., 172 F.3d 132, 144 (2d Cir. 1999); LeCompte v. Chrysler Credit Corp., 780 F.2d 1260, 1264 (5th Cir. 1986); Martin v. Gingerbread House, Inc., 977 F.2d 1405, 1407–08 (10th Cir. 1992). Some courts distinguish contractual indemnity between business entities, especially where the indemnitee is not itself the culpable employer, but PEOs should not assume enforceability. Draft indemnities to be severable and supported by independent state-law contract claims.

Practical CSA provisions that tend to hold up and that also reduce joint-employer indicators include:

  • Express allocation to the client of worker classification, exemption determinations, scheduling, supervision, and recording of all hours worked.
  • Client representations that all individuals performing services are reported to the PEO or are properly classified contractors, with a covenant to notify the PEO of any change.
  • Client indemnity, defense, and cooperation obligations for wage claims arising from client-controlled decisions, backed where feasible by a security deposit or employment practices liability insurance (EPLI) with wage and hour defense coverage.
  • Clear statements that PEO HR content is general information, not a classification determination, together with an escalation path to client counsel.
  • Termination rights where a client refuses to correct a known violation.

4. What operational controls reduce PEO risk?

  1. Separate administering from deciding. Process client instructions on pay and classification; do not make the decision. Document the client’s instruction.
  2. Audit high-risk signals. Flag exempt employees below state salary thresholds, job titles commonly misclassified (assistant managers, inside sales, coordinators), and large 1099 populations at worksite clients.
  3. Configure payroll correctly. Validate regular-rate calculations, state daily overtime (e.g., Cal. Lab. Code § 510), meal and rest premiums, and final-pay timing rules.
  4. Handle known violations deliberately. Once the PEO has actual knowledge of a violation and continues processing, willfulness arguments (three-year lookback) and the loss of the good-faith defense become more likely.
  5. Manage arbitration. Ensure that any arbitration agreements cover claims against the PEO as a co-employer and comply with state limits. The Ending Forced Arbitration of Sexual Assault and Sexual Harassment Act applies only to sexual assault and sexual harassment claims and does not reach ordinary wage claims.
  6. Track multistate rules. Monitor PEO licensing statutes, ABC-test states, and local minimum wage ordinances on a recurring basis.

Conclusion

For wage and hour claims, co-employment liability sits where control sits. The client controls the work and, in most cases, the classification decision, so the client should and usually does bear the primary exposure. The PEO’s risk is real but manageable: it is named because it is the visible payroll entity, and it is held liable when its own conduct (advising, configuring, approving) resembles that of an employer. PEOs that keep decisions with clients, document instructions, configure payroll accurately, and draft CSAs to allocate cost will find that, in most misclassification cases, the answer to “how exposed are we?” is “less than the complaint suggests.”

Frequently asked questions

Is a PEO liable when a client misclassifies a worker?

It depends on the PEO’s role. If the client pays a 1099 contractor outside the PEO, exposure is typically low. If the worker is on PEO payroll but the client misclassified them as exempt, exposure is moderate. If the PEO advised on, approved or set the classification or pay plan, exposure is high.

Can a client service agreement protect a PEO from FLSA liability?

Not from liability to employees. Workers and regulators aren’t parties to the agreement, and federal courts have held there is no right to contribution or indemnity for an employer under the FLSA. A well-drafted CSA can still shift cost between the PEO and the client, though PEOs shouldn’t assume an indemnity will be enforced.

What makes a PEO a joint employer under the FLSA?

Control. Across the circuit tests, the facts that expose PEOs are participating in hiring or termination decisions, setting or approving pay rates, configuring and administering timekeeping systems, and giving HR advice on classification or exemption status. Many courts still find that maintaining employment records alone doesn’t establish joint-employer status.

Does CPEO certification cover wage and hour claims?

No. Under 26 U.S.C. § 3511, a certified PEO is treated as the employer for federal employment tax purposes on covered wages paid to worksite employees. That protection doesn’t extend to FLSA wage obligations. Misclassified contractors paid outside the PEO’s payroll typically aren’t covered either, and the client bears the reclassification tax exposure.

This article is for general informational purposes and is not legal advice. Joint-employer and classification standards change frequently; verify the current status of the cited regulations, rulemakings, and cases before relying on them.